Skip to content
VVancouverPicks

Guide

How to Clean a Heat Pump: Indoor and Outdoor Unit Guide

Heat pumps are now one of the most common ways to heat and cool homes across Metro Vancouver. A little regular cleaning keeps them running efficiently. Here is what you can do yourself and what to leave to a technician.

Last reviewed November 12, 2026 by Vancouver Picks Editorial Team

How to Clean a Heat Pump: Indoor and Outdoor Unit Guide

Why cleaning matters

A heat pump moves heat through coils and fans. Dust on filters and leaves around the outdoor unit restrict airflow, making the system work harder for the same comfort. Regular cleaning is about efficiency, comfort and catching problems early. Always follow your unit's manual first.

Safety first

  • Turn the system off at the thermostat or remote, then switch off power at the outdoor disconnect box and/or the breaker before cleaning anything beyond filters.
  • Never open sealed panels or touch refrigerant lines and electrical components.
  • Coil fins bend easily. Be gentle.

Indoor unit: filters (monthly)

Ductless mini-split heads

  1. Lift the front cover.
  2. Slide out the mesh filters.
  3. Vacuum gently, or rinse with lukewarm water and mild soap.
  4. Let them dry completely before reinstalling.
  5. Wipe the cover and visible louvres with a damp cloth.

Ducted systems

Replace or clean the air handler filter on the schedule in your manual, often every one to three months. (See our furnace filter guide for the same process.)

Outdoor unit (spring and fall)

  1. Power off at the disconnect and breaker.
  2. Clear debris: remove leaves, needles and branches from the top and sides. Keep at least 60 cm (about 2 feet) of clear space around the unit, or what your manual specifies.
  3. Rinse the coils gently with a garden hose on a low, shower-type setting, spraying from the inside out if accessible, or from the outside in at a gentle angle. No pressure washers.
  4. Straighten bent fins carefully with a fin comb if needed.
  5. Check the base drains so meltwater and rain can escape.
  6. Wait for the unit to dry, then restore power.

Winter tips for BC

  • It's normal for the outdoor unit to go through defrost cycles and release steam in cold, damp weather.
  • In snowfall, keep snow cleared from around and on top of the unit.
  • Make sure the unit sits on a stand or pad above standing water.

Leave this to a technician

An annual service covers refrigerant charge, electrical connections, deep coil cleaning, condensate lines and the blower wheel. Book one if you notice ice that doesn't clear, odd noises, water leaking indoors, or a musty smell from the indoor head (which may need a professional deep clean).

Need a heat pump service? Use the form on this page to request quotes from local HVAC companies.

Frequently asked questions

How often should I clean my heat pump filters?

Check ductless filters monthly and clean them when dusty. For ducted systems, follow the filter schedule in your manual.

Can I pressure wash my outdoor heat pump?

No. High pressure bends fins and can damage the coil. Use a garden hose on a gentle setting.

Why is steam coming off my heat pump in winter?

That is usually a normal defrost cycle melting frost from the outdoor coil.

Related